MyLithiumBattery

Lithium Ion battery 48V 25Ah – LiFePO4 – PowerBrick®

Rated 5.00 out of 5 based on 1 customer rating
(1 customer review)

1 169.00 1 799.00  incl VAT

Lithium-ion Battery pack
48V 25Ah with built-in BMS
IP55 standard for PowerBrick STANDARD version
IP66 standard for PowerBrick PRO+ version

Clear

Description

Lithium Ion battery 48V 25Ah – LiFePO4 – PowerBrick®

The Lithium 48V 25Ah battery was created thanks to the know-how of PowerTech Systems. Company specialized in the design of high performance lithium ion lithium batteries.

Security

The PowerBrick® battery product line offers a high degree of safety through the use of cylindrical cells in Lithium Iron Phosphate LiFe (LiFePO4) technology. It incorporates an innovative control system (BMS, Battery Management System). It ensures a very high level of safety in use.
The BMS constantly monitors and balances the battery cells. This protects it and increases its lifespan.

The Lithium 48V 25Ah lithium battery is protected by a waterproof ABS case that resists splashing water and dust (IP55 protection for a PowerBrick® STANDARD battery or IP66 for a PowerBrick® PRO+ battery).

Replacement of lead batteries

The PowerBrick® product line has been designed to replace lead-acid batteries. It offers a quadrupled energy capacity for reduced weight and space requirements.

Simple installation

Each 48V 25Ah lithium battery has a nominal voltage of 51.2V. They can be connected in series (up to 2 batteries in series) and in parallel (up to 10 batteries). Thanks to its technology, the PowerBrick 48V 25Ah battery can be installed in all directions (vertically or horizontally, standing or lying down). The final assembly voltage can be 48V or 96V. This corresponds to almost all the different electrical applications (traction, solar storage, wind power).

The 48V 25Ah LFP battery pack is ideal for AGV (automated guided vehicle), marine, boats, forklifts, robots…

Batteries designed to have a better ecological footprint!

The 48V 25Ah PowerBrick® Lithium battery is twice as light and environmentally friendly for all types of use. These batteries can directly replace old generation batteries. The latter are poorly performing and very harmful to the environment through the use of heavy metals. But also, they are constrained by the difficulty of recycling them (batteries Lead VRLA, AGM or OPZ batteries).

The PowerBrick® range has a 2 or 5 year commercial warranty.

Garantee Garantee

Key points

 PowerBrick Standard PowerBrick Pro +
Continuous discharge current12.5A50A
30s continuous discharge25A100A
Maximum continuous charge12.5A25A
Sealed case IP ProtectionIP55IP66
Parallel assemblyup to 4Pup to 10P
Commercial warranty2 years2 or 5 years
    • 48V battery pack – Lithium Iron Phosphate (LFP)
    • Long life : 3000 – 5000 Cycles
    • Dimensions : 260mm x 168mm x 212 mm
    • Weight : 13.6 Kg
    • Nominal voltage : 51.2V
    • Maximum safety with advanced Built-in Battery Management System
    • Monitoring of cell and PCB temperature, current, voltage, SOC
    • Can be connected in series up to 2 units to obtain a voltage of 48V, 96V
    • Minimum 3000 cycles at 80% DOD (see chart tab)
    • Operating temperature in charge : 0°C à +60°C
    • Operating temperature in discharge: -15°C à +60°C
    • 100% Maintenance free
    • RoHS et UN38.3 certification

Garantee Garantee

Technical Charts

Dimensions

Frequently Asked Questions - PowerBrick® product line

What are the differences between PowerBrick® Standard and PowerBrick® Pro version ?

The main differences between the professional range (PowerBrick® Pro) and the consumer range (PowerBrick® Standard) are:

  • Technical characteristics of embedded BMS (especially charge and discharge power level)
  • Different IP (International Protection) level of product enclosure
  • Limitation on the number of battery that can be assembled in series and / or parallel
  • Warranty period limited to 2 years on the standard range, 5 years for the professional range

All datasheets are available for each product, making it possible to compare the performances of the different products.

How safe are Lithium-Ion PowerBrick® batteries ?

PowerBrick® batteries are using Lithium Iron Phosphate chemistry (LFP) that is one of the most safe Lithium-Ion technology. This chemistry is not subject to thermal runaway, is non-flammable and is considered as non-hazardous by international regulation standards.

Each battery is fitted with a high quality Battery Management System (BMS) that ensure a safeguard role during battery operation. The BMS is designed to deliver high power in complete safety for a very large spectrum of applications,

What can i use PowerBrick® battery for ?

PowerBrick® batteries are commonly used for Marine, Recreational vehicles, Golf Cart applications, CCTV, robotics, PV energy storage, etc. PowerBrick® Battery can be used for any system or application that would normally use Lead acid battery (AGM, GEL) in 12V, up to 48V.

After removing your old batteries, place PowerBrick® battery in the same way. You may use the same cables to reconnect PowerBrick® battery.

Do i need to recharge battery immediately after operation ?

PowerBrick® lithium-ion 12V or 48V batteries can be partially charged or discharged unlike Lead Acid batteries that needs to be fully charged after use or before storage. For instance, you can leave your battery half charged for some weeks without any issue.

If you plan to store battery for a long period (> 2 month), you need to charge battery at minimum 25% of SoC (State of Charge) before storage. It is necessary to check battery voltage every 6 month during storage.

How do I charge a PowerBrick® Lithium-ion battery ?

PowerBrick® lithium ion technology uses the latest and most advanced built-in battery management system (BMS) to monitor and prevent damage to the battery during use. You may utilize a Lead-acid charger with PowerBrick® Lithium battery, but some customers prefers using a Lithium charger to keep a better lifespan.

Several charging sources are possible:

  • Alternator: Most alternators (marine, RV, cars) will efficiently charge PowerBrick® lithium ion technology as soon alternator charge voltage is between 14.0V and 14.6V (for a 12V battery)
  • Conventional Lead-Acid battery charger: PowerBrick® Battery Management System (BMS) is designed to be compatible with standard chargers. You need to check that charger has a built-in CC/CV charge algorithm (Constant Current / Constant Voltage) and charger maximum voltage is comprised between 14.0V and 14.6V (for a 12V battery)
  • Lithium-Ion charger: This is the best way to charge PowerBrick® Lithium-ion battery. These chargers embeds some dedicated charge algorithm with precise charge voltage. It also manage efficiently charge floating voltage and duration in order to maximize battery life span.
How long does a PowerBrick® battery last ?

PowerBrick® advanced lithium-ion technology will provide you with 3000 complete charge and discharge cycles at 80% DoD (Depth of Discharge). After 3000 cycles, you will still have over 80% of usable energy left. In case you discharge PowerBrick® at 65% DoD rate, you can expect to get 5000 cycles.

  • Example 1: One PowerBrick® 12V-100Ah battery, after being discharged at 80% DoD for 3000 cycles, is now a 12v 80ah battery.
  • Example 2: One PowerBrick® 12V-100Ah, after being discharged at 65% DoD for 5000 cycles, is now also a 12v 80ah battery.

In term of time duration, If you discharge 80% of the PowerBrick® and then recharge it every day, 7 days a week for height years, you will still have 80% of usable battery energy left. This is a large increase in lifespan compared to a conventional Lead Acid battery (AGM, Gel) rated at 500 cycles for 50% DoD cycles.

What is the Battery Management System (BMS) and how does it work ?

Each PowerBrick® embeds a built-in BMS. This BMS is a high-tech design that manage two main aspects of battery during operation :

Protection features :
  • Low Voltage Protection Switch – Automatically disconnects at 10.0V
  • Over Voltage Protection Switch – Automatically disconnects at 14.8V
  • Short Circuit Protection Switch – Automatically and safely disconnects battery
  • Reverse Polarity Protection Switch – Automatically and safely disconnects battery
  • Over temperature – Automatically shut-down battery until normal temperature recovery
Balancing features :
  • Internal cell balancing – Automatically balances PowerBrick® cells during battery operation. Balancing algorithm has been developed to ensure perfect balance between cells throughout battery life.
  • Charge Balancing – for PowerBrick® connected in parallel and/or in series, the BMS will balance each PowerBrick® independently, in order to provide a constantly balanced battery system.
How to place Lithium-Ion batteries?

The PowerBrick® products are designed around an assembly of sealed cells. There is no risk of electrolyte leak. The whole of the block cells and embarked electronics is firmly fixed in the battery casing.

All our batteries can be placed in any positions (tilted or lying). There is no obligation to install them upright, as for the conventional batteries in Lead/AGM.

25Ah 48V PowerBrick STANDARD Specification

25Ah 48V PowerBrick STANDARD Specification

25Ah 48V PowerBrick PRO+ Specification

25Ah 48V PowerBrick PRO+ Specification

1 review for Lithium Ion battery 48V 25Ah – LiFePO4 – PowerBrick®

    Show reviews in all languages (1)

  1. Rated 5 out of 5

    James Emmery

    Great product ! High power, long duration. I replaced my old fashion lead acid battery on my electric boat. I now have constant power and very long endurance up to the end of discharge. Really good product.

Add a review

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

You may also like…