40A-12V battery charger for Lithium Iron Phosphate battery

Chargeur 900W-15A pour batterie 48V Lithium Fer Phosphate

15A-48V battery charger for Lithium Iron Phosphate battery

420.00 € incl VAT

15A-48V charger for 48V LFP batteries
Designed for 4x 12V PowerBrick® (general use) in series
Designed for 4x 12V PowerStart® (high discharge rate) in series
Charge algorithm designed for Lithium Iron Phosphate batteries
Fully isolated for parallel assembly (charge power increase)

In stock

900W-15A Charger for 48V Lithium Iron Phosphate LiFe (LiFePO4) battery

The 900W-15A charger for 48V Lithium Iron Phosphate battery optimizes the performance and lifespan of Lithium batteries.

This product is designed for the product lines:

The material

Front panel LEDs: LED 1 RED (power supply), LED 2 RED (charging), LED 2 GREEN (complete charging)
Electrical protection: Short-circuit, reverse polarity, overvoltage
Integrated ventilation system
Power supply 230VAC-50/60Hz

Electrical insolation

The charger has a full electrical isolation allowing several chargers to be connected in parallel to increase the charging power and shorten the charging time.

With energy efficiency > 85%, the charger produces less heat, delivers more energy and allows faster charging.

For safety

It is protected against short-circuit and accidental polarity reversal. The metal case with active ventilation system allows the charger to be used in harsh environments or hot climates.

Charge algorithm

The 900W-15A charger for 48V Lithium Iron Phosphate battery incorporates a charging algorithm fully compatible with Lithium Iron Phosphate technology batteries. Constant current (CC) / Constant voltage (CV) up to the end of the charge set at a current level of 200mA. The LFP (LiFePO4) technology allows a fast charging of the battery, sometimes in only 2 hours. As this technology has a very low discharge (<5% per month), the floating function is not useful. Charging current is automatically regulated thanks to its algorithm for more efficient charging and longer battery lifespan.

900W-15A Charger for 48V Lithium Iron Phosphate batteries
Rated input voltage	230 VAC
Input voltage range	100-240VAC
AC input voltage frequency	47-63Hz
Nominal charge voltage	51.2V (16 cells LiFePO4)
Charge voltage	58.4V +- 0.1V (16 cells LiFePO4)
Constant current	15A (+/- 0.5A)
Power efficiency	>85%
Maximum output power	900W
End of charge condition	0.12A < Charge current < 0.30A
Output voltage range	36-58.4V
Output over voltage protection	64V
Over voltage protection	The charger software limits the maximum output voltage to a level suitable for the connected battery system
Thermal cutback	The internal temperature monitor reduces the charger output power in extreme operational temperature to prevent damage
Output short circuit protection	6A
Short circuit protection at the output terminals. Automatic recovery after restoring to normal conditions
Reverse battery protection	The charger is protected against reversed battery connection.
Dimensions	27015095mm
Weight	3.2kg
Operating temperatures (max/min)	+40°C / -10°C
Storage temperatures (max/min)	60°C / -20°C (allow 2 hours to recover to normal temperature)