Subscribe to Newsletter
We will send you news and offers from MyLithiumBattery.com on a regular basis.
Maximum one email per month
Please fill-in right form with your contact details and click "Register"
[sibwp_form id=2]
Battery Balancer BBT
75.50 €
In stock
| Input voltage range | Up to 18 V per battery, 36 V total |
| Turn on level | 27,3 V +/- 1% |
| Turn off level | 26,6V +/- 1% |
| Current draw when off | 0,7 mA |
| Midpoint deviation to start balancing | 50 mV |
| Maximum balancing current | 0,7 A (when deviation > 100 mV) |
| Alarm trigger level | 210 mV |
| Alarm reset level | 140 mV |
| Alarm relay | 60 V / 1 A normally open |
| Alarm relay reset | Two terminals to connect a push button |
| Over temperature protection | yes |
| Operating temperature | -30 t0 +50 °C |
| Humidity (non condensing) | 95% |
This Battery Balancer is used to balance large string of batteries in series. It cand be used my 12V, 24V or 48V PowerBrick product range.
This accessory is useful for a permanent installation of batteries in series to ensure that the batteries are always balanced with each other.
- This device equalizes the state of charge of two series connected 12V batteries, or of several parallel strings of series connected batteries.
- When the charge voltage of a 24V battery system increases to more than 27V, the Battery Balancer will turn on and compare the voltage over the two series connected batteries.
- The Battery Balancer will draw a current of up to 1A from the battery (or parallel connected batteries) with the highest voltage.
- The resulting charge current differential will ensure that all batteries will converge to the same state of charge.
- If needed, several balancers can be paralleled.
- A 48V battery bank can be balanced with three Battery Balancers.
Reviews
There are no reviews yet